Vehicle Doctorz – AUCKLAND'S MOBILE MECHANIC & DIAGNOSTIC SPECIALISTS
ECU /TCM/ BCM CODING
Factory-level module programming, coding & calibration
Not every workshop can safely code or program vehicle control modules. We can. Our OEM-level coding tools communicate directly with your ECU, TCM and BCM — letting us program, adapt, calibrate and reset modules the same way a manufacturer’s dealership does. Mobile service across all of Auckland.
- Mobile — We Come To You
- 1 Year Warranty
- All Makes & Models
- 7 Days a Week
✅ OEM-Level Coding Tools
🚗 All Makes & Models lorem
📍 Mobile — Auckland Wide
🔒 1 Year Warranjd
💳 Afterpay Accepted
🕐 7 Days 9am–6pm
WHAT IS ECU / TCM / BCM CODING?
ECU, TCM and BCM coding means programming or reprogramming your vehicle’s control modules using the same dealer-level software manufacturers use — not just reading fault codes, but actually writing new configuration, calibration and adaptation data into the module itself.
Generic scan tools (the ones found in most independent garages) can read basic faults but cannot write to a module. They can’t replace a faulty ECU, code a new TCM after a transmission swap, or program a replacement BCM — leaving you stuck with warning lights and non-functioning systems.
Our equipment speaks the vehicle’s native programming language — giving us the ability to code new modules, recalibrate existing ones, and carry out manufacturer-level adaptations after repairs.
Module Programming
New or replacement ECU, TCM and BCM units coded and matched to your vehicle’s VIN and security system.
Adaptation & Calibration
Throttle body resets, transmission adaptation, steering angle and BCM feature calibration after repairs.
Guided Coding Procedures
OEM-specific coding sequences followed step-by-step — no shortcuts, no guesswork.
Written Coding Report
Full written record of every module coded, software version and configuration applied.
Direct Manufacturer Access
Our coding tools use the same protocols as factory equipment — CAN Bus, DoIP, UDS, SWFL — ensuring every module is coded correctly and securely the first time.
EV & Hybrid Ready aslkdjh
European Experts
Digital Report
Same-Day Service
THE CODING PROCESS
Simple, transparent test and done at your location — no towing required. test
Call, WhatsApp or fill in our quote form. We’ll confirm your booking, location and arrival time.
We connect to the relevant module and identify the exact coding, programming or adaptation required.
We program, calibrate or adapt the module using manufacturer-level software and procedures.
You receive a full written report. We verify the module is functioning correctly before we leave — same visit.
WHAT WE CODE
Our OEM tools cover coding, programming and calibration across every major control module
New ECU coding, immobiliser matching, throttle adaptation, injector coding, software updates and remapping.
TCM coding after replacement, gear adaptation resets, CVT/DSG/DCT/AT module calibration.
ABS module coding, steering angle sensor calibration, brake pressure sensor resets, ESC/DSC adaptation.
SRS module coding after replacement, crash data reset, occupant sensor calibration, seatbelt pretensioner coding.
Body Control (BCM) / BCM coding and programming, central locking setup, comfort feature activation, window/door module configuration.
Battery module coding, inverter calibration, charging module programming, high-voltage system configuration.
Climate control module coding, blend door actuator calibration, A/C compressor programming.
TPMS / Sensor Coding / Tyre pressure sensor coding and ID matching, O2/Lambda sensor coding, sensor re-learning after replacement.
Immobiliser / Key & Security / Key coding, immobiliser module programming, security module matching, anti-theft coding.
DIAGNOSTICS
NEW MODULE FITTED? NEEDS CODING?
Don’t drive with an uncoded module. Get proper OEM-level coding — today, at your location.
WHY OEM CODING BEATS GENERIC EVERY TIME
Saves You Money test
Saves You Time
We code and calibrate on the spot — no sending your car away, no waiting on a dealership booking.
Pinpoint Accuracy
OEM software ensures every module is coded to the exact specification your VIN requires.
We Come To You
Backed by Warranty
All coding work is covered by our 1 year workmanship warranty.
VEHICLES WE COVER.
🚗
BMW
⭐
MERCEDES
🔵
AUDI
🔶
VOLKSWAGEN
🏎️
PORSCHE
🌿
LAND ROVER
🔷
VOLVO
⚡
TESLA
🌱
TOYOTA
🔴
LEXUS
⚪
SUBARU
🟠
MAZDA
🔲
NISSAN
🟢
HYUNDAI
✳️
+ ALL MAKES
Don’t see your vehicle? Contact us — our OEM toolset covers virtually all vehicles sold in New Zealand. Call 027 202 1007 to confirm compatibility before booking.
CODING PRICING.
No hidden fees. No surprises. Fixed coding rates — Afterpay available.
Essential
Price on application — call for quote
- One module coded or programmed (ECU, TCM, BCM, etc.)
- VIN/Security matching
- Verbal confirmation report
- Basic calibration check
- Multi-module full scan
- Written report
- Repair quote included
Call 027 202 1007 for your quote
- Multiple modules coded/programmed
- Full adaptation & calibration
- Written coding report
- Post-coding system verification
- Guided OEM coding sequences
- Repair recommendation & quote
- Afterpay / WINZ quotes available
Includes HV battery & system coding
- Full OEM EV/Hybrid module coding
- Battery Management System (BMS) coding
- High-voltage system configuration
- Charging module programming
- Inverter calibration
- Full written coding report
- Specialist EV technician
FREQUENTLY ASKED QUESTIONS.
What is ECU, TCM or BCM coding?
It’s the process of programming, configuring or calibrating a vehicle’s control module so it functions correctly — whether that’s a brand-new replacement module being matched to your vehicle, or an existing module being recalibrated after a repair. Without proper coding, a new module often won’t communicate with the rest of the vehicle.
Why does a new module need to be coded?
Modules like the ECU, TCM and BCM are matched to your vehicle’s VIN, immobiliser system and other modules. A new or replacement unit fitted without coding may cause warning lights, non-functioning features, or the vehicle failing to start at all. Coding writes the correct configuration into the module so it works seamlessly with your vehicle.
Do you come to my home or office?
Yes — 100% mobile service. We bring our full OEM coding equipment to your home, workplace, or roadside location anywhere in Auckland. You don’t need to tow your vehicle. We work around your schedule, 7 days a week from 9am to 6pm.
How long does a coding job take?
A single module coding job typically takes 30 minutes to 1.5 hours, depending on the module and procedure required. More complex multi-module coding or adaptation can take longer. We’ll always give you a time estimate when booking.
Can you code modules after I've already fitted a replacement part?
Yes. If you’ve already had a module replaced — whether by us or another workshop — we can come out and complete the coding, adaptation and calibration required to get it functioning correctly.
Will coding fix a fault on its own?
Not always. Coding configures a module correctly, but if there’s an underlying mechanical or electrical fault, that needs to be diagnosed and repaired first. We’ll always check for underlying issues before or during coding, and let you know upfront what’s required.
Do you code EV and hybrid modules?
Yes — we are EV and hybrid specialists. Our OEM tools support battery management system (BMS) coding, high-voltage system configuration, charging module programming and inverter calibration. We specialise in European hybrid platforms including BMW, Mercedes and Audi plug-in hybrids.
Is Afterpay available for coding services?
Yes — Afterpay is accepted for all services. We also accept bank transfer. WINZ quotes are available upon request.
STILL HAVE QUESTIONS?
- 10+ years specialist experience
- Same tools as BMW, Mercedes, Audi dealers
- Full written coding report
- 1 year workmanship warranty
- Mobile — no towing needed
- Afterpay & WINZ quotes available
REQUEST YOUR CODING SERVICE
Call Us on
Auckland Wide — Mobile Service
9:00am – 6:00pm, 7 Days a Week
Payment Options
✅ Bank Transfer | ✅ Afterpay
✅ WINZ Quotes Accepted
✅ Parts Manufacturer Warranties Honoured
WE COME TO YOU
- entral Auckland — CBD, Ponsonby, Grey Lynn
- North Shore — Takapuna, Albany, Birkenhead
- East Auckland — Howick, Pakuranga, Botany
- South Auckland — Manukau, Papakura, Pukekohe
- West Auckland — Henderson, Te Atatu, Titirangi
- Inner East — Remuera, Epsom, Mt Eden, Newmarket
YOU MAY ALSO NEED.
💻
Advanced OEM Diagnostics
Full system scans across ECU, TCM, BCM, ABS and all control units to pinpoint the exact fault.
Module programming, coding and adaptation for ECU, TCM, BCM, ABS and all control units.
→
🔑
Key Programming test
→
⚡
Hybrid Battery Service
→
🔬
Pre-Purchase Inspection
→
🛞
Brake System Repair
→
⚙️
Transmission Repair
→
STOP GUESSING.
START CODING.
- OEM-Level Coding Tools
- 1 Year Warranty
- Mobile — We Come To You
- Afterpay Available
- 7 Days a Week